Original news was published on 27 September, 2018

Cargo shipping line Hansa Heavy Lift has transported two fully assembled ship-to-shore container gantry cranes from Ireland to the UK for Liebherr Container Cranes.

The cranes measured 81 meters long, 30 meters wide and 57 meters high, and were shipped aboard the multipurpose vessel HHL Lagos. They were loaded at DSG Terminal, Port of Cork, and discharged at the Port of Hull, UK.

“This was a complex project where in-depth engineering knowledge and operational expertise was an absolute requirement throughout all stages,” said Emek Ersin Takmaz, head of projects at HHL.

Based in Hamburg, Germany, Hansa operates a fleet of 14 multipurpose heavy-lift vessels with lifting capacity of up to 1,400 tonnes.

*NEWS SOURCE

Original news was published on 26 September, 2018

On behalf of broker HBB Hanseatic Break Bulk, Hansa Heavy Lift transported two ship-to-shore gantry cranes for Liebherr Container Cranes from the Doyle Shipping Group (DSG) terminal at the port of Cork, Ireland to Hull in the UK.

Andre Milschus, managing director at HBB Hanseatic Break Bulk, pointed out that this was the first time fully assembled ship-to-shore cranes were transported via a lift-on and lift-off method on a heavy lift vessel after being built in Ireland.

Each crane measured 81.4 m by 30.3 m by 57.3 m; Hansa and Liebherr worked together to design tailor-made seafastening and load spreading structures, as well as special rigging for loading and discharge.

At Cork, the cranes were moved using SPMTs. Once lifted onto HHL Lagos, the first of the cranes was moved to the forward end of the hatch covers. The second was then lifted directly into its stowage position in the cargo hold.

Both cranes were discharged directly onto the rails at the port of Hull.

Denis Doolan, transport and shipping manager of Liebherr Container Cranes, said: “This project was quite a challenging one from a logistics point of view and took months in the planning.”

*NEWS SOURCE

Original news was published on 21 September, 2018

Shipping agent Tuscor Lloyds has delivered a series of breakbulk cargo baskets from Rio de Janeiro, Brazil, to the Qatar.

The oversized consignment involved handling of eight CBR cargo baskets, weighing 6.1 tonnes, eight CBV weighing 10.1 tonnes, four CBZ weighing 12.1 tonnes, and 14 KH open-top containers. The cargo was loaded in Macaé, Rio de Janeiro and transferred to the port of Itaguaí for loading.

“During the operation, we definitely appreciated our team’s experience in the Brazilian market and the great relationships with local professionals, which allowed us to maintain the high level of service despite all the challenges,” said Suellen Higino, Logistics Specialist at Tuscor Lloyds.

Registered in Manchester, UK, Tuscor Lloyds provides transport solutions for large project cargo shipments and complex freight consignments across the globe.

*NEWS SOURCE

Original news was published on 19 September, 2018

Japanese shipping company Mitsui O.S.K Lines (MOL) has ordered construction of two 240,000 dwt bulkers at compatriot Imabari Shipbuilding, Intermodal said in its weekly report.

Delivery dates and shipbuilding prices of the Capesize duo have not been disclosed.

This is the second bulker order the company has been tied to this year. Namely, MOL ordered two Panamaxes back in March from Chinese shipbuilder Jiangsu New Yangzijiang, paying USD 26.5 million per unit.

The newbuilding pair is scheduled for delivery in 2019.

The company has 71 bulkers in its fleet, based on the data from VesselsValue, with Capesizes dominating the fleet with 20 units.

Intermodal reported three more bulker contracts for last week, scored by Chinese shipbuilders.

CSIC Haijing reportedly booked two Kamsarmaxes at Tianjin Xingang, Turkish Akmar Shipping ordered two 61,000 dwt bulkers at DACKS, and Wuhu Shipyard secured an order for two 64,000 dwt bulkers from Chinese owner Shishi Dingxin. As disclosed, all six newbuildings are expected for delivery in 2020.

*NEWS SOURCE

Glad to share with you that OPCA members can register Breakbulk Americas with 25% discount!

Please click here to register Breakbulk Americas 2018.

Original news was published on 17 September, 2018

The port of Indiana-Burns recently took delivery of 12 brewery tanks destined for a Michigan beer producer, on board Fednav’s bulk carrier Federal Mackinac.

Each cylindrical tank can hold 800 barrels of beer - or 198,400 pints - weighs 11.5 tonnes, and is 40 ft (12.2 m) long and 14 ft (4.3 m) in diameter.

The tanks were discharged from the vessel by Federal Marine Terminal's shore crane into a storage area. They will then be loaded onto heavy haulage trucks for final delivery.

Indiana-Burns says it has become a regular hub for heavy lift and project cargo due to its ocean access and proximity to the US heartland, although it mainly handles bulks such as coal, limestone, steel and agricultural products. In the last three years, the port has handled dozens of brewery tanks in five separate shipments.

*NEWS SOURCE

Dear All,

This notification is for your kind attention from OPCA Thailand member: Falcon Logistics Solution Co., Ltd.

Ms.Narisara Chiewpattanacharoen from Falcon Logistics Solution Co., Ltd. informed us that they will move to a new office on 17 September 2018.

After 17 September 2018 their address, telephone, fax numbers and BL Consignment will be as below;

Company Name: Falcon Logistics Solution Co., Ltd.
Address: 24, 5th Floor, Room 501, Srinakarin, Nongbon, Pravet, Bangkok 10250 Thailand
Tel: +662 1033286
Fax: +662 1033235

They also stated that nothing will be changed in their account and banking system. So their old address will be effective until they inform about the change of their account system.

Please click here for more information about the office change of Falcon Logistics Solution Co., Ltd.

You can contact with Ms.Chollada (Amp): sales_1@falconlogistics.net and Ms.Patacharaporn (Pumpui): operation_2@falconlogistics.net for more information.

For your kind information.

VISIT WEBSITE (CLICK HERE!) | VISIT OPCA PROFILE (CLICK HERE!)

Original news was published on 11 September, 2018

Bremen-based terminal operator Weserport, part of the Rhenus Group, has replaced its gantry slewing crane with a Konecranes Gottwald model 6 mobile harbour crane.

The mobile harbour crane arrived at Weserport’s Terminal 1 earlier this year and has been used to handle breakbulk cargo and project loads. The gantry slewing crane has now been dismantled.

At 125 tonnes, the load-bearing capacity of the Konecranes Gottwald crane is more than double that of the crane it has replaced, says Weserport. “As a result, we can now handle individual heavy-duty items with our own equipment,” explains Heiner Delicat, managing director of Weserport.

The mobile harbour crane is mainly handling steel and breakbulk cargo at Weserport, but it is also likely be used to handle heavy project cargo modules and containers in future.

*NEWS SOURCE

Original news was published on 06 September, 2018

Strategic heavy-lift specialist ALE has delivered an Argentine SAOCOM 1A satellite as part of the Space-X rocket project.

The breakbulk consignment involved transport of the 12-tonne satellite from its fabrication yard to Bariloche airport. It was then loaded aboard an Antonov plane and transferred ready to be launched at Vandenberg air field.

“Transport operations required a complete shut-down of the 10 kilometer route, as well as civilian, Police and military escorts … the lifting operations were planned carefully in accordance with the client’s standards and ALE lifted the satellite onto the skidding system, where it was skidded into the airplane,” said Raul Anriquez, ALE’s project manager.

Headquartered in Staffordshire in the UK, ALE operates more than 30 regional offices around the world focused on complex heavy-lift projects in the oil and gas, civil, nuclear, offshore, renewables, petrochemical, ports, marine, minerals and metals and mining sectors.

*NEWS SOURCE

Dear All,

Good News...

Proud to share with you the professional performance of OPCA member Bullocks Freightmasters International, Australia.

About Project:

2 X LTM 1250 Crane
34 items
2 x mobile units each 60T / 192cbm
314T / 610 cbm

1 X LTR crawler crane
1 X main unit @ 52 / 160 cbm
17 pieces / 190T / 220 cbm


Bullocks Freightmasters International recently handled the crane from Zeebrugge to Melbourne. The above consignment was shipped via WWL with the assistance of their load port agent Holland Freight Bridge.

All delivered on time to Melbourne over 100 plus trailer loads delivered over a 2 week period to Crowlands Victoria and Lincol Gap South Australia.

They thank their client and suppliers for a great result and look forward to our next challenge ahead.

Please contact with Anthony Paratore at BULLOCKS FREIGHTMASTERS INTERNATIONAL, if you have any project requirements.


Congratulations to BULLOCKS FREIGHTMASTERS INTERNATIONAL, Australia for their excellent job.

VISIT WEBSITE (CLICK HERE!) | VISIT OPCA PROFILE (CLICK HERE!)